Pipe smoking is popular among tobacco users because it is relaxing and looks aristocratic and stylish. Since time immemorial, well known fictional characters have smoked a tobacco pipe to think contemplate or reason. This is because one can smoke a pipe is a slow and quiet process. Smokers of tobacco pipes enjoy the smoke like connoisseurs enjoying a glass of good wine. A pipe that is packed correctly can give the users many hours of a stress free smoking experience.
To enjoy a relaxing tobacco pipe smoke, you need to pack the pipe correctly. If the pipe is not packed correctly, you will find too much dottle or ash left in the pipe after the smoke. One of the results of a badly packed pipe is tongue bite. Tongue bite is a burning sensation in the tongue after you smoke a badly packed pipe. Your tongue may be sore or tender after the smoke when you have tongue bite.
If your pipe is not packed properly, you will find drawing from the pipe very difficult. The joy of smoking a tobacco pipe is the draw and this joy will be killed by packing a pipe the wrong way. Packing a pipe too tightly will result in dottle at the end of the pipe and often result in tongue bite. You may have to light your pipe again and again if you pack your pipe very loosely. Learning the correct method of packing and lighting your pipe correctly will give you hours of relaxation and enjoyment. Packing a pipe is not a technique that can be learned quickly. It takes time and practice to pack the pipe correctly so that you can enjoy the perfect smoke. There are tried and tested methods used by pipe smokers that new pipe smokers practice to enjoy smoking their pipe.
The final effect of pipe smoking depends on factors including the variety of tobacco used, the moisture in the blend, the depth of the pipe’s bowl, the smoke hole’s diameter, metal parts of the pipe and evil casings in the blend.
Mini list what you really need:
- Pipe Cleaners
- Metal Tobacco Pipe Stand
- Pipe Black Ceramic Ashtray
- Pipe Reamer Tamper Pokers Tool
- 3 in 1 Tobacco Pipe Cleaner Cleaning Tool
How to Pack a Tobacco Pipe? Methods of Packing Pipes
There are three well-known methods of packing the pipe. The most common among pipe packing methods is the three layer method. Another method is a method by Mike Butera. This method is popular among those who find packing a pipe difficult. The third method of Pipe packing was demonstrated at the 2004 Chicagoland Pipe Show. This method is called the Frank method of packing a pipe.
To prepare the pipe for packing, you should first make sure that the pipe is completely cool.
You should make sure that ash from previous smokes does not obstruct the pipe. To do this put a pipe cleaner through the stem of your pipe, move the pipe cleaner around to loosen any dottle. Turn the pipe bowl upside down over a dustbin or large ashtray. Gently blow into the stem of the pipe to remove any leftover dottle from the pipe. Use a doubled pipe cleaner to clean the bowl. Clean the rim of the bowl.
Lay a small amount of tobacco on a flat surface like a chopping board. Pull apart any lumps in the tobacco. If you feel the tobacco is a little moist, leave it for about fifteen minutes to dry.
Common Pipe Packing Methods
The Three Layer method
When you use the three layer method of packing your pipe, the result should be that the bowl of the pipe is packed evenly from top to bottom. Each layer of tobacco in the bowl is packed progressively tighter than the layer beneath.
- At first you should drop tobacco into the bowl of the clean pipe till the tobacco brims over the rim of the bowl. Use your finger or the tamping tool to press the tobacco till the bowl is half filled with tobacco.
- Drop tobacco again into the pipe till the bowl is brimming. Press the tobacco with your finger or tamping tool till the bowl is three fourths filled with tobacco.
- To make the third layer, drop tobacco into the pipe till it brims over. Firmly press the top layer till it is a centimetre below the rim of bowl with your finger or tamping tool. If the tobacco feels springy when pressed with your finger, you have packed the pipe correctly. If the tobacco does not feel springy it is packed too tightly. If your finger or tamper leaves an indentation mark, the tobacco is pressed to loosely.
Use the unlit pipe and suck in air through the pipe. If it feels like sucking a straw immersed in a soft drink, the packing is correctly done. If it does not have a feeling of a comfortable draw, start packing the pipe again by emptying and cleaning the bowl, using the reamer tool to clean the smoke hole and dropping layers of tobacco into the bowl till you get it right.
The Mike Butera method
If you are unable to get the three layer method of packing tobacco right and do not get the springy effect in the tobacco after you pack your pipe, this method may be easier for you. In this method, you need to chop tobacco into quarter inch long squares or rectangles. Pack the pipe in the same manner as you do using the three layer method. Drop the chopped tobacco in the bowl till it brims over, press down till half full, drop chopped tobacco again till it brims over and press till it fills three-fourths of the bowl and drop tobacco again into the bowl again till it is above the rim and press firmly.
The Frank method
This method of pipe packing was invented by Achim Frank. The method is used especially in pipe smoking competitions. The bowl of the pipe is filled to the brim. The sides are pressed down and not the top. This results in a looser bottom layer and compacted top layers. Using this method results in the tobacco burning longer and smokers so not have to light the pipe often.
The Stuff and Puff method
One method of pipe packing is the stuff and puff method where tobacco is scooped up from the container with the bowl of the pipe. You can then use your fingers to put pressure and pack the pipe. The method is also called the ram and cram method.
The Air Pocket Method
The air pocket method is a pipe packing method where clumps of tobacco are put into the pipe bowl. An empty air pocket is left at the bottom of the bowl. You should ensure that one half or one third of the bottom of the pipe bowl does not contain tobacco.
The Swirl Method
Using this method involves taking a clump of tobacco in the palm of your hand. You need to swirl the bowl of the pipe on the tobacco and scoop it up. You then press the tobacco down.
Some pipe smokers use a combination of methods to develop their own hybrid method.
Once you pack your pipe correctly, you need to light up properly to have a satisfying and enjoyable smoking experience. The best tools to light a tobacco pipe are wooden matches or special pipe lighters. Ordinary cigarette lighters are generally not recommended for lighting a pipe because they tend to alter the taste of the tobacco and have an adverse flavor of the draw.
If you use a wooden match, allow the sulphur to burn off after you strike the match before lighting the tobacco.
How to Light your Pipe?
If you use a pipe lighter, manufacturers give instructions as to how you should light your pipe for the most enjoyable smoke. A pipe lighter contains butane and is specially made to light tobacco pipes. These lighters are specially made and do not change the taste of the tobacco. The flame is surrounded by metal and lights the pipe directly without the flame bending over the side. Activating the lighter is similar to a cigarette lighter. You need to turn the wheel to bring up the flame and apply the flame that stays within a metal ring to the tobacco.
Once you strike the match or activate the lighter flame, you need to use a circular motion to light the tobacco in the pipe bowl evenly. At this point it is enough if you burn the tobacco slightly. You don’t need to light it completely. This part of the procedure of lighting a pipe is called the charring light or false light. At the same time you should make steady puffs on the mouthpiece. Keep puffing at intervals to ensure that the tobacco stays lighted. If the tobacco is burning correctly the bowl will stay lighted for at least ten minutes. The purpose of this initial charring light is to balance the density and moisture of the tobacco. You will see the tobacco puff up and unravel during the charring light. Once the charring light goes out you need to perform the next step in lighting the pipe.
Lighting the Pipe
After the charring light goes out, light the tobacco again using a wooden match or pipe lighter. You should use the same circular motion to set the entire surface of the tobacco alight evenly. The tobacco will not unravel or puff up because its density and moisture are balanced by the charring light. You can now put out the flame of the match or pipe lighter and start enjoying smoking your pipe. Do not draw the smoke into your lungs. When you smoke a pipe, you smoke to enjoy the flavor of the tobacco. The tobacco used for pipes is strong as compared to that used in cigarettes.
Your pipe may be packed properly and you may have lit your pipe correctly, but sometimes the tobacco does not remain lighted. When you have this problem, all you need to do is cover the bowl with your fingers leaving space for the smoke to go through and take quick puffs. When you finish taking puffs remove your fingers from the bowl. Cover the bowl with your fingers again and take another few quick puffs. This process will keep your pipe lit.
The process is called stoking the pipe. When you take quick puffs the tobacco stays lighted without allowing it to get too hot. You must put your fingers over the bowl to test whether the tobacco is too hot. If the tobacco is too hot, you could get tongue bite. Tongue bite is not only unpleasant but spoils the enjoyment of the smoke.
Once you have packed the pipe properly, lighted the tobacco correctly and stoked the pipe if required, you can start enjoying smoking your pipe. You should smoke your pipe slowly with even puffs. The flavour of the tobacco should be savoured by you. Always keep pipe cleaners handy while smoking the pipe to keep the pipe clean and dry and to enhance the enjoyment of smoking the pipe.
Pipe smoking is an art form that is refined by pipe smokers through practice. Packing the pipe correctly takes time. You need to experiment with different types of pipe packing methods and arrive at the method or combination of methods that gives you the best smoking experience. Lighting up a cigarette is a simple quick procedure but lighting a pipe takes a little longer. This is because pipe smoking is meant for those who wish to relax by smoking. It is not a quick fix to relieve stress like cigarette smoking but an activity performed by connoisseurs who delight in enjoying the flavour of the tobacco that the smoke through a pipe.